Skip to Navigation Skip to Content

Important Update: Click here for the latest information on tariffs and their impact on our industry.

Resource Center

Tips and essentials for the restaurant, foodservice and HVAC spaces in one place.

How to Clean a Jaccard Model H Meat Tenderizer

Guide
Share
Picture - How to Clean a Jaccard Model H Meat Tenderizer

The Jaccard Model H meat tenderizer allows you to tenderize large pieces of meat without tearing, so it’s sure to be a valuable asset in any commercial setting. That’s why it’s important to have a good set of cleaning instructions. With this guide on how to clean a Jaccard Model H meat tenderizer, you will be able to clean your unit with ease.

Supplies List

  • Protective Gloves
  • Dish Soap
  • Soft Sponge
  • Warm Water
  • Small Stainless Steel Brunch
  • Dishwasher

Disassembling the Machine

  • Step 1. Remove the rear hold down plate - To lift out the rear hold down plate, take out the 3 knurled nuts on the back of the stripper frame assembly. 
  • Step 2. Remove the front hold down plate - Take out the 2 knurled nuts on the front hold down plate of the stripper frame assembly and then lift out the plate.
  • Step 3. Pull out the white plastic separator comb - Remove the piece by lifting and pulling it away from the blades. 
  • Step 4. Remove the blade set - Hold the blade set with a towel or protective gloves. While holding the blade set, loosen the knurled nuts that hold the dovetail bar. Then, remove the blade set.

NOTE: It isn’t necessary to completely remove the knurled nuts that hold the dovetail bar: you only have to loosen the nuts enough so that you can remove the blade set.

Cleaning the Machine

  • Step 5. Wash the white meat tray - Remove the tray and then use warm water and soap to clean it.
  • Step 6. Clean the blade set and white plastic separator comb - First, rinse the blade set and plastic separator comb with water to remove any pieces of meat. Then, wash them in the dishwasher. If necessary, use a stainless steel brush to clean between the blades and / or comb fingers.
  • Step 7. Clean the main body of the machine - Use a sponge and warm, soapy water to clean the main body of the unit. Rinse with warm water to remove soap suds.
  • Step 8. Reassemble the machine - Reverse steps 1-4 in order to reassemble the machine.

For more information on Jaccard meat tenderizer cleaning and preventative maintenance, take a look at our large collection of Jaccard manuals online.

Please contact a local authorized service agent who can help with this specific unit and all your commercial kitchen equipment needs.