Anthony International Cooler & Freezer Cleaning
When it comes to displaying food in merchandisers, a clean door is as much a flashy advertisement as the goods on display. That’s why if your door is starting to look like a child’s finger painting experiment, it’s time to apply a little, good old-fashioned TLC. In this guide, we’ll divulge the trade secrets of Anthony International cooler and freezer cleaning for the Infinity and Vista series.
How Often Should You Clean an Anthony International Cooler & Freezer Door
With a high volume of sticky fingers and all the associated dirt, germs and grime smudging the glass and potentially contaminating product, you might be wondering how often you should clean your Anthony International cooler or freezer’s door and frame.
Let it be known that the exact frequency in which you should get out your glass cleaner and rag will largely depend on the amount of foot traffic your doors receive on a daily basis. As a good rule of thumb, you can follow these recommendations:
- Exterior glass door & handles – Daily
- Frame, door rails, bezels & gaskets – Once a month
- Interior glass door – Once a month
How to Clean an Anthony International Cooler & Freezer Door
In this section, we’ll deliver step-by-step instructions on how to clean the interior and exterior glass as well as the door gasket and frame. Keep in mind when cleaning your Anthony International freezer or cooler to only use non abrasive cloths and brushes, as the latter could scratch your equipment and void the manufacturer warranty.
Supplies You’ll Need
- Bucket
- Water
- Mild cleaning solution
- Glass cleaning solution
- Microfiber Cloth
- Squeegee
- Spray bottle
Cleaning the Door Gasket & Frame
When cleaning the door gasket and frame of your Anthony International cooler or freezer, it’s important not to use any abrasive cleaning solutions or tools where you’d pick at or scratch the surface to remove residues. Instead, you can follow these warranty-safe cleaning procedures below:
- Step 1. Mix a mild cleaning solution – In a small bucket or bowl, add a few drops of a mild cleaning agent to fresh water. You’ll also need to gather several clean microfiber cloths or non abrasive sponges to wipe down the door.
- Step 2. Clean the door gasket – Dip your microfiber cloth or non abrasive sponge into the mild cleaning agent to wash the gasket. Pay extra attention to the gasket’s contours and where it rests against the door. Once finished, you can take a fresh cloth and water to rinse.
- Step 3. Clean the frame – Repeat this process, taking care to wipe down the inner and outer surfaces, especially the corners and edges.
- Step 4. Pat dry before closing – Before closing the door and sealing in any leftover moisture, be sure to dry all surfaces thoroughly with a clean cloth or towel.
Cleaning the Glass
When cleaning the glass doors, it’s important to only use the following manufacturer-approved cleaners that are ammonia free:
- Windex® Original
- Windex® Vinegar
- MicroClean Professional APC®
- Formula 409®
- Fantastik®
Additionally, you’ll want to take care not to spray the cleaner on any food products or the PVC or plastic parts of the door, as this could break down and damage the material. For this reason, we recommend spraying the glass cleaning solution directly onto your microfiber cloth before using an up-and-down motion to polish the door. Repeat until it sparkles to your satisfaction.
Anti Fog Cleaning for Anthony International Coolers & Freezers
Anthony International cooler and freezer cleaning instructions for low-temperature doors:
- Step 1. Mix together a cleaning solution – Mix one part 30% pure alcohol and 5 parts water cleaning solution in a spray bottle.
- Step 2. Open the door – Allow the door to breathe for about a minute before you begin cleaning. This lets the door and ambient temperatures equalize, making it easier and safer to clean.
- Step 3. Spray the solution directly onto the door – Using your 30% alcohol and water solution, spray a liberal amount to the door.
- Step 4. Squeegee the door – Going from top to bottom, squeegee the door, wiping off excess moisture from the rubber tip after every pass.
List of Manufacturer-Approved Cleaners on Anti-Fog Films
Be aware that freezing temperatures within the merchandiser cabinet can cause some cleaning solutions to freeze on the interior door. If temperatures are below freezing, you can mix 30% pure alcohol and water to clean the door. Otherwise, this is the list of manufacturer-approved cleaners for Anthony International cooler and freezer doors:
- Windex®
- Vinegar Windex®
- Sidolin®
- Mr. Muscle®
- Formula 409®
- Greased Lightning®
- Grease & Grime®
- MicroClean Professional APC®
- Fantastik®
- Mean Green®
- Mr. Clean®
Need more assistance or model-specific information, such as removing or replacing the door gaskets? Check out our Anthony International parts manuals and diagrams for troubleshooting tips and tricks, manufacturer-approved cleaning and maintenance advice and more.