Please Be Advised: Due to a system outage, email notifications are currently delayed. Orders can still be completed online, and emails will send when functionality is restored.
Replacing your Fisher pre-rinse sprayer is a breeze with the right steps. Learn how to properly install a new sprayer using the Fisher pre-rinse sprayer installation instructions from us to ensure a safe and secure process.
Pre-Rinse Sprayer Installation Instructions
Follow our helpful step-by-step guide below to install your new pre-rinse sprayer with ease:
Step 1: Turn off the water supply.
Step 2: Remove the spray valve from the insulated handle using an adjustable wrench to hold it still, turning the handle clockwise with your hand.
Step 3: Remove the old gasket and clean out the insulated handle.
Step 4: Insert the new gasket into the handle.
Step 5: Hand tighten the new spray valve onto the handle.
Step 6: Turn on the water supply and check for leaks.
Please contact a local authorized service agent who can help with these specific units and all your commercial kitchen equipment needs.
