How to Set a Daikin AC Remote
A Daikin air conditioner can bring down temperatures in rooms to keep everyone from overheating on hot days. Learning how to set a daikin AC remote is easy and essential for operating the AC. Below we have a short guide that will help you get started on setting the remote.
The guide below works for a Daikin mini split AC and models CTXS07JVJU, CTXS09HVJU and CTXS12HVJU.
Setting the Remote Day/Time
Before you start, make sure there’s nothing blocking the receiver between the remote and the unit. Check that the remote has batteries that work before starting.
- Turn the breaker on - Turn on the breaker so the louvers close
- Press the clock button - Press the clock button
- Set the current day - Use the up and down arrow buttons to set the current day of the week
- Press the clock button - Press the clock button again to confirm and move on
- Set the current time - Use the up and down arrow buttons to set the current time. Holding the arrows will rapidly increase or decrease the time display
- Press the clock button - Press the clock button to confirm
Changing the Temperature
Use either the up or down temperature arrows to adjust the temperature setting as needed. Each different operation setting has different temperature points that will start and stop operation. For more information, make sure to check out your manufacturer manual for detailed information.
Setting the Airflow Rate
Press the fan button to cycle through the airflow rate options. There are 5 levels that you can cycle through, starting from the lowest fan setting to the highest.
Setting the Airflow Direction
- Press the horizontal swing button - Press the horizontal swing button to move the horizontal louvers
- Press the button again - Press the horizontal swing button again to confirm the position
- Press the vertical swing button - Press the vertical swing button to move the vertical louvers
- Press the button again - Press the vertical swing button again to confirm the position
- Set 3-D airflow - Press both the vertical and horizontal swing buttons to start 3-D airflow operation. The display will light up when this starts
- Cancel 3-D airflow - Press either the vertical or horizontal swing buttons to cancel this operation
Start Intelligent Eye Operation
To start the intelligent eye operation, press the intelligent eye button. When you want to turn this operation off, press the button again.
Start Powerful Operation
To start the powerful operation, press the powerful button. When you want to turn this operation off, press the button again.
Start Outdoor Quiet Operation
To start the outdoor quiet operation, press the outdoor button. When you want to turn this operation off, press the button again.
Start Home Leave Operation
To start the home leave operation, press the home leave button. When you want to turn this operation off, press the button again.
Setting the Timer (OFF Operation)
- Check the clock time - Make sure that the clock has the correct present time
- Press the OFF button - Press the OFF timer button on the remote
- Select a time setting - Press the up or down timer arrows until the time reaches your desired point
- Press the OFF button again - Press the OFF timer button again. The timer lamp light should light up
Setting the Timer (ON Operation)
- Check the clock time - Make sure that the clock has the correct present time
- Press the ON button - Press the ON timer button on the remote
- Select a time setting - Press the up or down timer arrows until the time reaches your desired point
- Press the ON button again - Press the ON timer button again. The timer lamp light should light up