Skip to Navigation Skip to Content

Resource Center

Tips, tricks and essentials for restaurant and foodservice equipment in one place.

Resetting an Ice-O-Matic Elevation Series Unit

Ice-O-Matic logo

If you notice a flashing red light and hear no ice dropping from your Ice-O-Matic ice maker, then you may need to reset the unit. Follow our simple steps to get the ice flowing again. This guide is specifically for resetting an Ice-O-Matic Elevation Series unit.

Steps to Resetting an Ice-O-Matic Elevation Series Unit

  • Step 1. Using a phillips head screwdriver, loosen the two screws at the base of the front panel.
  • Step 2. Lift the front panel up and off.
  • Step 3. Press and hold both buttons for 3 seconds until you see the lights reset.
  • Step 4. Turn the unit back on by pressing the power button.
  • Step 5. Put the front panel back on and tighten the screws.

Please contact a local authorized service agent who can help with these specific units and all your commercial kitchen equipment needs.