Beverage-Air Undercounter Refrigerator Shelf Installation and Removal
If you need to know how to do a Beverage-Air undercounter refrigeration shelf installation and removal, you’ve come to the right place. Feel free to watch our short video for visual instruction or reference our supplemental guide below for additional details.
How to Install a Beverage-Air Undercounter Refrigerator Shelf
Installing an undercounter refrigerator shelf is simple and can be done in a few short steps. Read on to learn how to quickly set up:
- Step 1. Determine shelf spacing – Before you start, it’s a good idea to determine how far apart you want the shelves from each other. If you plan on storing tall items like bottles or containers, you’ll want to allow for more room. The pilaster has reference numbers to make alignment and installation easier.
- Step 2. Install the top tab – First, insert the top tab of the shelf clip into the desired hole of the pilaster.
- Note: Make sure the retaining clip is facing winged-side up.
- Step 3. Install the bottom tab – In the same breath, insert the bottom half of the tab into the pilaster hole directly beneath the top tab.
- Note: Slightly squeeze the clip for easier shelf installation.
- Step 4. Install remaining clips – Repeat steps 2 and 3 for all remaining shelf clips, carefully noting placement and reference numbers.
- Step 5. Install the shelves – Place the shelves on top of the clips, ensuring the shelf clip wing hooks onto the bar and that the guard rails are facing up. And that’s how you install a Beverage-Air undercounter refrigerator shelf!
How to Remove a Beverage-Air Undercounter Refrigerator Shelf
Removing the undercounter refrigerator shelves is just as, if not easier, than installation. Check out our shelf removal tips below:
- Step 1. Remove the shelves – Remove any ingredients or products that may be resting on the shelves and store them in an alternative refrigerator. Next, take out the shelves.
- Step 2. Uninstall the bottom tab – Slight squeeze the shelf clip, gently lifting to remove the bottom tab from the pilaster hole.
- Step 3. Uninstall the top tab – From there, unhook the top tab from the pilaster hole by following your upward momentum. Repeat steps 2-3 until all shelf hooks are removed.
For more helpful tips and tricks, consult our library of Beverage-Air manuals and diagrams.