Commercial Reach-In Refrigerator Troubleshooting
Keeping your commercial refrigerator working is vital. Otherwise you could be throwing out spoiled product and your hard earned dollars with it. If you notice the unit door won’t securely close or isn’t keeping cool, Parts Town has you covered. These commercial reach-in refrigerator troubleshooting tips will help you get your unit working so product can stay safely stored.
Not Cooling
- Power cord isn’t plugged in - Verify the cable isn’t damaged and then plug in the unit.
- Unit is located in a crowded spot - Move equipment so there is space for ventilation. Ensure the unit has space from the wall as well.
- Temperature setting is incorrect - Use the controller to adjust the temperature to the proper setting.
- Door is opened too frequently or left open too long - Grab ingredients quickly or in fewer trips to keep the door closed.
- Condenser coil is dirty - Clean the coil with a brush or vacuum every 30-90 days.
Compressor Not Running
- Condenser coil is dirty or clogged - Clean the coil with a brush or vacuum every 30-90 days.
- Faulty switch relay - Contact an authorized service technician to repair.
- Thermostat or defrost timer is stuck or broken - Contact an authorized service technician to repair.
Door Not Closing
- Door gasket is worn or cracked - Replace the gasket by following the manufacturer’s instructions.
- Door hinges’ screws are loose - Fasten the screws on the hinge. Be sure to check the door is level and adjust accordingly.
- Casters and wheels aren’t level - Make adjustments by following the manufacturer’s instructions.
- Door gasket is dirty - Clean the gasket by following the manufacturer’s instructions.