How to Change Temperature Set Points on a Randell Prep Table
Learning how to change temperature set points on a Randell prep table is important if you have to troubleshoot your unit. If you need instructions, this guide provides step-by-step directions on how to adjust the rail and drawer set point temperature using a Danfoss controller.
These directions are for Randell 8000-290 and 9000W-290 series prep tables.
Instructions for Changing the Set Point
It’s recommended that rail temperatures be at 21°Fahrenheit (-6°Celsius) or less and fridge base temperature be between 33-40°Fahrenheit (0.6-4.4°Celsius). It’s also recommended to only make changes in 2°Fahrenheit (1.1°Celsius) increments and to wait 24 hours before making another adjustment.
- Step 1. Access the set point - Press and hold the up arrow to access the set point temperature.
- Step 2. Raise the set point - Once the set point starts flashing, you can increase the temperature by pressing the up arrow.
- Step 3. Lower the set point - To decrease the set point, press the down arrow when the temperature is flashing.
- Step 4. Confirm the new set point - No action is needed. After 30 seconds, the unit will confirm the new set point and the display will automatically change to show the current temperature.
If you need more information on maintaining and troubleshooting your Randell prep table unit, be sure to take a look at the extensive collection of Randell manuals on our site.