How to Clean a U-Line JoeTap Nitro Brew Dispenser
Beverage dispensers pour delicious drinks but can get dirty inside and out after prolonged use. In order to keep drinks tasting right and equipment looking sparkling clean in front of customers, it’ll require some regularly scheduled preventative maintenance. With the help of this guide and video though, Parts Town is here to help show you how to clean a U-Line JoeTap nitro brew dispenser. It’ll show you cleaning both the interior and exterior of the unit so the entire thing will be sparkling clean.
These units need to be fully cleaned weekly to ensure quality beverage is poured and that equipment stays in optimal condition.
Supplies
U-Line JoeTap Nitro Brew Dispenser Exterior & Interior Cleaning
The following steps will help to clean the unit both inside and out.
- Polish the exterior - Use a soft cloth and stainless steel cleaner to clean up the exterior of the unit. Be sure to polish with the grain.
- Note. Avoid using abrasive cleaners
- Power down the unit - Unplug the unit and allow it to start manually defrosting.
- Wash the interior - With a soft cloth, warm water and dish soap, wash the interior of the unit. You can use a bucket to mix the dish soap and water.
- Note. Avoid using solvent-based or abrasive cleaners
- Rinse the interior - Use a dampened cloth to rinse off the interior of the unit.
- Dry the interior - The interior can either be left open to air dry or be wiped dry with a soft cloth.
- Wash the overflow tray - Take the overflow tray over to a sink and wash it with dish soap and a sponge.
- Rinse and dry the overflow tray - Rinse off the tray at the sink and wipe it dry with a soft cloth
Need help with JoeTap units? Check out our collection of JoeTap manuals and diagrams. Or browse our assortment of other commercial beverage equipment articles.