How to Clean a Zumex Juicer
Pulp and peels leave commercial juicers a mess. So once the brunch rush is over and demands for juice have stopped, you’re going to need to get it washed and ready for the next shift. If you aren’t sure how to clean a Zumex juicer, you’ve come to the right place. We’ll walk you through the steps so you can get the unit looking like new again. Since most of the parts are in constant contact with juice, the unit must be cleaned daily.
The following steps are applicable to several Zumex juicers such as the Speed S Plus, Speed Up, Tank Podium and Pomegranate models.
Supplies
- Non-abrasive sponge
- Zumex Citric Active cleaner
- Water
- Cleaning cloths
- Hydroalcoholic disinfectant
- Brush
Daily Cleaning
While all the disassembled parts can be cleaned in a dishwasher, we’ll show you how to clean them by hand with Zumex Citric Active detergent.
- Step 1. Turn the juicer off and unplug the power cord.
- Step 2. Disassemble the juicer.
- Step 3. Clean the front zone with a non-abrasive sponge and Zumex Citric Active cleaner.
- Step 4. Rinse the detergent, apply a hydroalcoholic disinfectant and rinse again after 1 minute.
- Step 5. Wash the cover, feeder plate, subfilter, tray and peel guides with Zumex Citric Active cleaner and a non-abrasive sponge.
- Note: With all parts, make sure to rinse the detergent carefully, apply disinfectant and rinse after 1 minute.
- Step 6. Clean the tap and tray with Zumex Citric Active cleaner and a non-abrasive sponge.
- Note: Make sure to rinse the detergent carefully, apply disinfectant and rinse after 1 minute.
- Step 7. Wash the peel ejectors and blade with Zumex Citric Active cleaner and a non-abrasive sponge.
- Note: Be cautious while cleaning the blade and make sure to rinse the detergent carefully, apply disinfectant and rinse after 1 minute.
- Step 8. Clean the juicing system with Zumex Citric Active cleaner, a non-abrasive sponge and a brush.
- Note: Make sure to rinse the detergent carefully, apply disinfectant and rinse after 1 minute.
- Step 9. Remove the end guides and top black lid from the Automatic PulpOut system so the sweeping belt comes out.
- Step 10. Clean all the Automatic PulpOut system parts with Zumex Citric Active cleaner and a non-abrasive sponge.
- Note: Make sure to rinse the detergent carefully, apply disinfectant and rinse after 1 minute.
- Step 11. Let all of the cleaned components air dry or dry them by hand with a cloth.
- Step 12. Reassemble the unit using our how-to guide or the user manual.
Need more help with commercial juicers? Check out our collection of Zumex manuals for more troubleshooting tips, error codes and more.