How to Clean an Aladdin Temp-Rite MD Series Cart
Preventative maintenance is an important part of keeping commercial equipment running smoothly. That’s why we have created this guide to help teach you how to clean an Aladdin Temp-Rite MD series cart. Watch the video above or read the cleaning steps below to keep your cart shiny and clean.
How to Clean an Aladdin Temp-Rite MD Series Cart
Never use a cart washer or sharp objects like scrapers, abrasives or steam to clean the cart.
- Step 1. Clean exterior - Using warm water, a cloth and mild detergent, wash the exterior sides and handle.
- Step 2. Rinse and dry exterior - Rinse the exterior with a damp cloth and dry it with a different cloth.
- Step 3. Remove tray assemblies - To remove the tray assemblies, lift up from the bottom pin and push to release from the top pin. Make sure to make note of what pins tray slides are installed to before removing them.
- Step 4. Clean interior walls - Using warm water, a cloth and mild detergent, wash the interior walls.
- Step 5. Clean interior corners - Clean the interior corners and other areas covered with food with a soft, nylon brush.
- Step 6. Apply stainless steel cleaner - Apply diluted stainless steel cleaner to the interior.
- Step 7. Let excess water drain - Allow any excess water to drain through the interior drain holes. Make sure not to tip the cart while it’s draining.
- Step 8. Dry interior - Dry the interior using a clean cloth.
- Step 9. Reinstall assemblies - Reinstall the assemblies into the unit by pushing into the top pin, followed by the bottom pin. Check that the trays are aligned after reinstalling.