How to Set the Temperature on a Danfoss ERC 112 Controller
Danfoss ERC 112 controllers have a user-friendly interface that makes the operation of refrigeration units very straightforward, especially in regards to changing the settings. If you need to adjust the set point on your unit, this guide explains how to set the temperature on a Danfoss ERC 112 controller quickly and easily.
This article contains instructions for models such as the ERC 112C and the ERC 112D. For more information on operating similar ERC units, see our Danfoss controller reset guide.
Changing the Set Point on a Danfoss ERC 112 Controller
- Step 1. Locate the controller - First, determine the controller’s location. Refer to your unit’s manual if needed.
- Step 2. Turn on the controller (if necessary) - If the device is turned off, press and hold the power button until the controller turns on.
- Step 3. Unlock the unit (if necessary) - If the unit is locked, press and hold the UP and DOWN arrows simultaneously for 5 seconds. Once “PAS” appears on the display, press the OK button in the lower left-hand corner, use the UP or DOWN errors to enter the password and then press OK.
- Step 4. Adjust the temperature - To increase the temperature, press the UP arrow button. To decrease the temperature, press the DOWN arrow button. After 30 seconds the display will show the new set point as the unit begins adjusting the temperature.