Skip to Navigation Skip to Content

Resource Center

Tips, tricks and essentials for restaurant and foodservice equipment in one place.

How to Use a Globe Stand Mixer

Video
Share

Creating dough for fresh breads and pizzas is easy with the right commercial kitchen equipment and the know-how to use them. Improperly using a unit poses the risk of damages or accidents that can easily be avoided. Simply follow these steps on how to use a Globe stand mixer to get the unit stirring dough consistently.

How to Use a Globe Stand Mixer

The mixer itself makes mixing dough easier than ever.

  • Step 1. Add product - Pour the appropriate amount of ingredients into the mixing bowl.
  • Step 2. Close the guard - Rotate the bowl guard to the closed position.
  • Step 3. Raise the bowl - Lift the bowl by rotating the bowl-lift wheel clockwise until it’s all the way up in position. 
  • Step 4. Set the speed - Select the appropriate mixer speed.
  • Step 5. Set the timer - Use the arrow buttons to set the mixer timer.
  • Step 6. Start mixing - Press the green button to start the mixer.
  • Step 7. Mix - Let product mix and add additional ingredients accordingly.
    • Note. Don’t change speeds during this time.
  • Step 8. Finish mixing - Either let the timer run out or step the mixer by pressing the red STOP button.
  • Step 9. Inspect product - Check on product to ensure it’s properly mixed and restart the mixer if necessary. 
  • Steo 10. Lower the bowl - Rotate the bowl-lift wheel counterclockwise until the mixing bowl is completely lowered. 
  • Step 11. Open the guard - Rotate the bowl guard to the open position. 

How to Use a Globe Stand Mixer Attachment Hub

 Globe mixers have an attachment hub to further its potential capabilities with special ingredients. 

  • Step 1. Power down the unit - Turn off the mixer and unplug the power cord.
  • Step 2. Uncover the hub - Loosen the thumbscrew and remove the plastic cover from the attachment hub.
  • Step 3. Lubricate - Use mineral oil, Globe lubricating oil or food-quality grease to lubricate the attachment shaft. 
  • Step 4. Install attachment - Select your desired attachment and insert its shaft into the hub. 
  • Step 5. Secure the attachment - Fasten the thumbscrew back into the hub to ensure the attachment is secure. 

Need some more guides for commercial mixers? Check out our large selection of Globe manuals and diagrams for tips specific to your model.

Please contact a local authorized service agent who can help with these specific units and all your commercial kitchen equipment needs.