Skip to Navigation Skip to Content

Important Update: Click here for the latest information on tariffs and their impact on our industry.

Resource Center

Tips and essentials for the restaurant, foodservice and HVAC spaces in one place.

Champion Dishwasher Error Codes

Guide
Share
Champion Logo-Champion Dishwasher Error Codes

The plates are stacking up and your Champion dishwasher is displaying things like E0F and E2F. What does it all mean? Maybe you can survive on hand washing the dishes for now, but not during the dinner crowd that’s scheduled to burst through the doors in about two hours' time. What do you do?

Here at Parts Town, we understand the urgency, confusion and ultimate frustration that pops up alongside an error code. That’s why we’ve put together an easy-to-follow list of the most common Champion dishwasher error codes so you can get back up and running just in time for the dinner rush. 

Champion Dishwasher Error Code Charts 

Note: For you folks who use the good ol’ metric system, your error codes will have the letter ‘C' tacked on to the end. For those using the imperial system, the error codes will be followed by an ‘F.’

Models UH-200B & UH-200

Error Code

Problem

Result

E0F/E0C

UH-200B

  • Broken booster temperature thermistor
  • Booster heater has been disabled

UH-200

  • No booster thermistor was detected

UH-200B

  • Final rinse temperature will be too low

UH-200

  • No result

E1F/E1C

  • Broken wash temperature thermistor
  • Wash tank heater will not work 
  • Wash temperature will be too low

E2F/E2C

  • Rinse temperature thermistor is broken
  • No result

E3F/E3C

  • Pressure transducer is broken 
  • No result 

LOF/LOC/LO

  • Temperature is below 115℉ (46℃)
  • It’s normal to see LO during the initial fill cycle
  • If LO displays outside of the initial fill cycle, it could mean that there is a problem with the booster or final rinse display thermistor

Models UH130, UH130B, UH230, UH230B, UL130 

Wash & Rinse Display Codes

These error codes will display on either the wash or rinse temperature screen and will indicate if the dishwasher is not reaching set temperatures or has detected faulty components.  

Error Code

Problem

Result

Lo

  • Wash or rinse temperature is below 100℉ (38℃)
  • Dishes aren’t being properly sanitized

HHH

  • Wash and rinse temperature is above 180℉ (82℃)
  • Can cause lime buildup 
  • Can cause pipes to erode 
  • Can nullify detergents

drᖵ

  • Wash tank is empty and heater is still on
  • Tank may be extremely hot

E

  • Broken wash thermistor 
  • Broken wire between thermistor and board
  • Loose connection between thermistor and board
  • Cannot record accurate temperature readings

Booster & Final Rinse Thermistor Display Codes

These error codes will display on the rinse temperature screen and will indicate if there is a problem with any of the boosters or final rinse thermistors. 

Error Code

Problem

Result

oH

  • Booster is locked out
  • Booster temperature is over 210℉ (99℃)

oE

  • Broken booster thermistor
  • Broken or disconnected booster thermistor wire
  • Cannot record accurate temperature readings

oEE

  • Broken booster and final rinse display  thermistors
  • Unplugged booster and final rinse thermistors 
  • Broken or disconnected booster and final rinse display thermistor wires
  • Cannot record accurate temperature readings

Need more help deciphering Champion dishwasher error codes? Check out our collection of Champion manuals or troubleshooting guides to pinpoint the problem quickly.

Please contact a local authorized service agent who can help with these specific units and all your commercial equipment needs.

Share