How to Clean an AccuTemp Evolution Steamer
AccuTemp Evolution steamers are known for their advanced technology and operational efficiency that produce consistent cooking results. Since these machines are sure to be central to foodservice operations, proper care is essential. If you’re in need of instructions, this guide on how to clean an AccuTemp Evolution steamer details daily and weekly maintenance tasks so you can keep your unit safe and sanitary.
These directions are for connected and connectionless E6 series electric and N6 gas models, such as E32081D060 (3-pan connectionless countertop) and N61201E060 DBL (connected 6-pan stand) units.
Supplies
- Warm Water
- Cleaning Cloths
- White Vinegar
- Non-Metallic Cleaning Pad
Avoid using a water jet or pressure washer as they may damage the machine. Also, remember to remove any food product from the unit before beginning the cleaning procedures.
Pre-Cleaning Procedures
- Step 1. Turn off the unit - Press the On/Off key to turn off the machine.
- Step 2. Unplug the machine - Disconnect the power cord from the electrical outlet to reduce the risk of electric shock.
- Step 3. Let the steamer cool - Allow the unit to cool for at least 30 minutes, or until the interior surfaces are no longer hot to the touch.
Daily Cleaning
- Step 1. Drain the steamer - Open the drain valve and allow the cooking chamber to drain completely.
- Step 2. Take out removable components - Remove the pan racks, steam collector and overfill sensor. For connected units, uninstall the condensate tray as well.
- Step 3. Clean the cooking chamber components - Clean the uninstalled parts by wiping them with a damp cloth. Be sure to dry them afterwards with a soft cloth.
- Step 4. Maintain the interior - Clean the machine interior by wiping the chamber surfaces with a damp cloth, then dry with a soft cloth.
- Step 5. Clean the gasket - Wipe the gasket with warm water and a clean cloth, then dry thoroughly.
- Step 6. Maintain the front face - Clean the front face of the cooking chamber by wiping it down with a damp cloth, then drying completely.
- Step 7. Reinstall the cooking chamber components - Return the uninstalled parts to the unit. Remember that the machine won’t operate without the overfill sensor, so make sure to reinstall it before resuming operation.
- Step 8. Empty the drain pan (connectionless units only) - Uninstall and empty the drain pan. Be sure to wipe it down with a clean cloth and then dry it before returning it to the machine.
- Step 9. Air dry the steamer overnight - Leave the door ajar so the interior can air dry overnight.
Weekly Maintenance
Descaling the Steamer
- Step 1. Restart the unit - Plug in the machine and press the On/Off switch to power on the steamer.
- Step 2. Close the drain valve - Make sure the drain valve is closed before proceeding.
- Step 3. Pour white vinegar into the cooking chamber - Add 1 cup (8OZ, 0.24L) to the cooking chamber.
- Step 4. Add tap water (connectionless models only) - Pour 2-1/2 gallons (9.5L) of tap water into the machine and then shut the door.
- Step 5. Run Cook mode for 15 minutes - Push the Cook button on the control panel to run the unit in cook mode for 15 minutes. Note that the steamer won’t shut off automatically, so keep time manually.
- Step 6. Cool down the unit - Press the On/Off key at the 15-minute mark to end the cook cycle, then allow the machine to cool for at least 30 minutes, or until interior surfaces are no longer hot to the touch.
- Step 7. Drain the steamer - Open the drain valve so the descaling solution can exit the unit.
Rinsing the Unit
- Step 1. Close the drain - Shut the drain valve before beginning the rinsing process.
- Step 2. Pour in tap water (connectionless models only) - Add 2-1/2 gallons (9.5L) of tap water into the unit and then shut the door.
- Step 3. Run Cook mode for 15 minutes - Press the Cook button to put the machine into Cook mode for 15 minutes. The unit won’t shut off automatically, so keep track of time manually.
- Step 4. Let the steamer cool - Push the On/Off key after 15 minutes have elapsed, then allow the unit to cool for at least 30 minutes, or until the inside surfaces are no longer too hot to touch.
- Step 5. Empty the machine - Release the drain valve so the rinse water can flow out of the unit.
Cleaning the Interior
- Step 1. Disconnect the unit from power - Unplug the power cord to minimize the risk of electrical hazards.
- Step 2. Remove chamber components - Take out the pan racks, steam distributor, steam collector and overfill sensor. For connected units, remove the condensate tray; for connectionless models, uninstall the drain pan.
- Step 3. Clean the removable parts - Wipe the uninstalled components with a damp cloth, then dry them with a soft cloth.
- Step 4. Maintain the water sensors - Use a non-metallic cleaning pad to clean the water sensors.
- Step 5. Wipe the unit interior - Clean the cooking chamber surfaces with a damp cloth, then wipe with a dry cloth to soak up any excess moisture.
- Step 6. Reinstall the chamber components - Return the uninstalled components to the machine, taking special care to reinstall the overfill sensor since the unit won’t operate without it.
- Step 7. Dry out the interior overnight - Let the unit air dry by leaving the door open overnight.
Resuming Normal Operation
- Step 1. Make sure the overfill sensor is installed - Check to see if the overfill sensor was reinstalled; if not, return it to the machine.
- Step 2. Close the door - Shut the cooking chamber door.
- Step 3. Plug in the unit - Reconnect the machine to power by plugging the power cord into an electrical outlet.
- Step 4. Use the steamer normally - You may now use the unit normally.
If you found this article helpful, be sure to check out the extensive collection of AccuTemp manuals and diagrams on our site for more information on operating, maintaining and troubleshooting your specific model.