The Robot Coupe Robot Cook is a versatile food processor that can not only chop, mix and grind food, but also cook it. Needless to say, the Robot Cook is great for any commercial kitchen setting. However, if something’s not right and you’re seeing an error code but aren’t sure what it means, we’ve got just the guide for you. Take a look at our Robot Coupe Robot Cook error code breakdown and know how to remedy the situation.
Error Code
Problem
Solution
Er01
Thermal variator has cut-out
Let the unit cool down then press the “Stop” switch to reset
Er02
Thermal motor’s cut out
Let the machine cool down, let it run faster or use the intermittent setting 0101
Er03
Issue with power supply
Check unit’s power supply
Er04
Incorrect accessory configuration
Dismantle and reassemble all accessories then press the “Stop” switch to reset
Er05
Internal bus over-voltage
Check the power supply and/or have checked by authorized service technician
Er06
Thermal cut-out control board
Let the unit cool down then press the “Stop” button to reset
Er07
Bowl is out of alignment and unsafe
Remove the bowl and replace in proper alignment to reset safety features
Additional Messages
__
Contact authorized service technician
For more troubleshooting help, cleaning instructions and more, take a look at your collection of Robot Coupe manuals.
Please contact a local authorized service agent who can help with these specific units and all your commercial kitchen equipment needs.
