Troubleshooting Antunes Rapid Steamer System Error Codes
Error codes can be frustrating when you aren’t sure what the issue is or how to fix it. Luckily, we have the guide below to help with Troubleshooting Antunes Rapid Steamer System Error Codes. We will go over the various errors you might see displayed on the steamer. This way, you can get it back up and running in no time.
System Error: Zero Cross
Issue |
|
The unit is not plugged in all the way | Plug the unit in fully |
Power cord or electrical plug is damaged | Have the power cord replaced |
System Error: Warmup Timed Out
Issue | Fix |
Heating element or relay is inoperable | Contact an authorized service agent for further assistance |
System Error: High Temp
Issue | Fix |
The hi-limit switch has been tripped | Reset the hi-limit switch |
System Error: Open Probe TC1
Issue | Fix |
Thermocouple has loosened, has burnt wiring or is open in wiring | Contact an authorized service agent |
System Error: FRAM
Issue | Fix |
Control board is inoperable | Reset by turning off unit and unplugging/plugging in the power cord |
System Error: Database Failure
Issue | Fix |
Data corruption on the recipes | Factory reset the unit |