TurboChef i3 & i5 Error Code Troubleshooting

Subscribe on YouTube

Error codes aren’t always a reason to sound the alarm. Sometimes the issue causing it is simple and can be corrected on your own. The codes are meant to help you easily figure out what’s wrong with the oven. Each code has a different meaning, and as long as you know what it is, you can solve the problem. If you can’t remember what they mean, Parts Town has you covered. This guide for TurboChef i3 and i5 error code troubleshooting can help you figure out the cause and solution so you can get the oven up and running again.

TurboChef i3 & i5 Error Codes

Error Code	Issue	Fix
F1: Blower Running Status Bad	Circuit breaker is off or tripped Oven power is interrupted Blower motor isn’t running	Turn on or reset the breaker Reset the oven Contact an authorized service technician
F2: Cook Temperature Low	Circuit breaker is off or tripped Oven cavity air nozzles are blocked or dirty Oven door is out of alignment High limit is tripped Blower motor isn’t running	Turn on or reset the breaker Clear away blockages and clean the nozzles Open and close the door a few times before securely closing it Reset the high limit Contact an authorized service technician
F3: Magnetron Current Low	Microwave circuit is defective	Contact an authorized service technician
F4: Door Monitor Defective	Door switches are out of order	Contact an authorized service technician
F5: Magnetron Oven Temperature	Cool air is blocked from the oven Rear cooling fan guard is blocked or dirty	Remove anything obstructing cool air to the unit Clean the guard and clear away blockages
F6: EC Temp	Cool air is blocked from the oven Rear cooling fan guard is blocked or dirty	Remove anything obstructing cool air to the unit Clean the guard and clear away blockages

For more information on troubleshooting or to learn cleaning or maintenance tips, check out our TurboChef manuals and diagrams.

HVAC Parts Are Here!

Take Parts Town on the Go!

Find the parts you need to fix equipment!