Skip to Navigation Skip to Content

Resource Center

Tips and essentials for the restaurant, foodservice and HVAC spaces in one place.

Eureka Grinder Cleaning

Man filling a coffee grinder with beans - Eureka grinder cleaning

No matter if there’s a coffee bean clog or it’s the end of the day, keeping your Eureka grinder clean is important to getting fresh tasting coffee. Follow our Eureka grinder cleaning instructions to get your unit ready for the next order.

Supplies

  • Screwdriver
  • Small brush
  • Straw or zip tie
  • Cloths

Eureka Grinder Cleaning Instructions

  • Step 1. Turn the unit off and unplug it from the outlet.
  • Step 2. Remove the set screw from the side of the hopper.
  • Step 3. Remove the hopper.
  • Step 4. Remove the plastic collar.
  • Step 5. Remove the three screws on the assembly.
  • Step 6. Lift the assembly out of the unit.
  • Step 7. Use a small brush to brush any remaining coffee grounds out of the assembly.
  • Step 8. Brush out any coffee from the burr assembly.
  • Step 9. If there is a clog in the chute, take a zip tie or a straw and try to break it up.
  • Step 10. Reassemble the grinder.
  • Step 11. Using a damp cloth, wipe down the exterior.
  • Step 12. With a dry cloth, dry the exterior completely.

Check out our Eureka manuals and diagrams for troubleshooting tips, cleaning tips and more.

Please contact a local authorized service agent who can help with these specific units and all your commercial kitchen equipment needs.